|Place of origin||Japan|
|Used by||Samurai, Onna-musha, Shinobi, Kendo, Iaido practitioners|
|Produced||Nanboku-chō period (1336－1392) which corresponds to the early Muromachi period (1336–1573) to present|
|Blade length||Approx. 60–80 cm (23.62–31.5 in)|
|Blade type||Curved, single-edged|
|Hilt type||Two-handed swept, with circular or squared guard|
|Scabbard/sheath||Lacquered wood, some are covered with fish skin, decorated with brass and copper.|
A katana (刀 or かたな) is a Japanese sword characterized by a curved, single-edged blade with a circular or squared guard and long grip to accommodate two hands. Developed later than the tachi, it was used by samurai in feudal Japan and worn with the blade facing upward. Since the Muromachi period, many old tachi were cut from the root and shortened, and the blade at the root was crushed and converted into katana. The official term for katana in Japan is uchigatana (打刀) and the term katana (刀) often refers to single-edged swords from around the world.
Etymology and loanwords
The word katana first appears in Japanese in the Nihon Shoki of 720. The term is a compound of kata ("one side, one-sided") + na ("blade"), in contrast to the double-sided tsurugi. See more at the Wiktionary entry.
Pronounced [katana], the kun'yomi (Japanese reading) of the kanji 刀, originally meaning dao or knife/saber in Chinese, the word has been adopted as a loanword by the Portuguese. In Portuguese the designation (spelled catana) means "large knife" or machete.
The katana is generally defined as the standard sized, moderately curved (as opposed to the older tachi featuring more curvature) Japanese sword with a blade length greater than 60.6 cm (23.86 inches) (Japanese 2 Shaku). It is characterized by its distinctive appearance: a curved, slender, single-edged blade with a circular or squared guard (tsuba) and long grip to accommodate two hands.
With a few exceptions, katana and tachi can be distinguished from each other, if signed, by the location of the signature (mei) on the tang (nakago). In general, the mei should be carved into the side of the nakago which would face outward when the sword was worn. Since a tachi was worn with the cutting edge down, and the katana was worn with the cutting edge up, the mei would be in opposite locations on the tang.
Western historians have said that katana were among the finest cutting weapons in world military history. However, the main weapons on the battlefield in the Sengoku period in the 15th century were yumi (bow), yari (spear) and tanegashima (gun), and katana and tachi were used only for close combat. During this period, the tactics changed to a group battle by ashigaru (foot soldiers) mobilized in large numbers, so naginata (pole weapon) and tachi became obsolete as weapons on the battlefield and were replaced by yari and katana. In the relatively peaceful Edo period, katana increased in importance as a weapon, and at the end of the Edo period, shishi (political activists) fought many battles using katana as their main weapon. Throughout history, katana and tachi were regarded as gifts between daimyo (feudal lord) and samurai, offerings to the kami enshrined in Shinto shrines, and symbols of authority and spirituality of samurai.
The production of swords in Japan is divided into specific time periods:
- Jōkotō (ancient swords, until around 900)
- Kotō (old swords from around 900–1596)
- Shintō (new swords 1596–1780)
- Shinshintō (newer swords 1781–1876)
- Gendaitō (modern or contemporary swords 1876–present)
Kotō (Old swords)
Katana originates from sasuga (刺刀), a kind of tantō (short sword or knife) used by lower-ranking samurai who fought on foot in the Kamakura period (1185–1333). Their main weapon was a long naginata and sasuga was a spare weapon. In the Nanboku-chō period (1336－1392) which corresponds to the early Muromachi period (1336－1573), long weapons such as ōdachi were popular, and along with this, sasuga lengthened and finally became katana. Also, there is a theory that koshigatana (腰刀), a kind of tantō which was equipped by high ranking samurai together with tachi, developed to katana through the same historical background as sasuga, and it is possible that both developed to katana. The oldest katana in existence today is called Hishizukuri uchigatana, which was forged in the Nanbokuchō period, and was dedicated to Kasuga Shrine later.
The first use of katana as a word to describe a long sword that was different from a tachi, occurs as early as the Kamakura Period. These references to "uchigatana" and "tsubagatana" seem to indicate a different style of sword, possibly a less costly sword for lower-ranking warriors. Starting around the year 1400, long swords signed with the katana-style mei were made. This was in response to samurai wearing their tachi in what is now called "katana style" (cutting edge up). Japanese swords are traditionally worn with the mei facing away from the wearer. When a tachi was worn in the style of a katana, with the cutting edge up, the tachi's signature would be facing the wrong way. The fact that swordsmiths started signing swords with a katana signature shows that some samurai of that time period had started wearing their swords in a different manner.
Traditionally, yumi (bows) were the main weapon of war in Japan, and tachi and naginata were used only for close combat. The Ōnin War in the late 15th century in the Muromachi period expanded into a large-scale domestic war, in which employed farmers called ashigaru were mobilized in large numbers. They fought on foot using katana shorter than tachi. In the Sengoku period (period of warring states) in the late Muromachi period, the war became bigger and ashigaru fought in a close formation using yari (spears) lent to them. Furthermore, in the late 16th century, tanegashima (muskets) were introduced from Portugal, and Japanese swordsmiths mass-produced improved products, with ashigaru fighting with leased guns. On the battlefield in Japan, guns and spears became main weapons in addition to bows. Due to the changes in fighting styles in these wars, the tachi and naginata became obsolete among samurai, and the katana, which was easy to carry, became the mainstream. The dazzling looking tachi gradually became a symbol of the authority of high-ranking samurai.
On the other hand, kenjutsu (swordsmanship) that makes use of the characteristics of katana was invented. The quicker draw of the sword was well suited to combat where victory depended heavily on short response times. (The practice and martial art for drawing the sword quickly and responding to a sudden attack was called Battōjutsu, which is still kept alive through the teaching of Iaido.) The katana further facilitated this by being worn thrust through a belt-like sash (obi) with the sharpened edge facing up. Ideally, samurai could draw the sword and strike the enemy in a single motion. Previously, the curved tachi had been worn with the edge of the blade facing down and suspended from a belt.
From the 15th century, low-quality swords were mass-produced under the influence of the large-scale war. These swords, along with spears, were lent to recruited farmers called ashigaru and swords were exported. Such mass-produced swords are called kazuuchimono, and swordsmiths of the Bisen school and Mino school produced them by division of labor. The export of katana and tachi reached its peak during this period, from the late 15th century to early 16th century when at least 200,000 swords were shipped to Ming Dynasty China in official trade in an attempt to soak up the production of Japanese weapons and make it harder for pirates in the area to arm. In the Ming Dynasty of China, Japanese swords and their tactics were studied to repel pirates, and wodao and miaodao were developed based on Japanese swords.
From this period, the tang (nakago) of many old tachi were cut and shortened into katana. This kind of remake is called suriage (磨上げ). For example, many of the tachi that Masamune forged during the Kamakura period were converted into katana, so his only existing works are katana and tantō.
From the late Muromachi period (Sengoku period) to the early Edo period, samurai were sometimes equipped with a katana blade pointing downwards like a tachi. This style of sword is called handachi, "half tachi". In handachi, both styles were often mixed, for example, fastening to the obi was katana style, but metalworking of the scabbard was tachi style.
In the Muromachi period, especially the Sengoku period, people such as farmers, townspeople, and monks could have a sword. However, in 1588 Toyotomi Hideyoshi banned farmers from owning weapons and conducted a sword hunt to forcibly remove swords from anyone identifying as a farmer.
The length of the katana blade varied considerably during the course of its history. In the late 14th and early 15th centuries, katana blades tended to have lengths between 70 and 73 centimetres (28 and 29 in). During the early 16th century, the average length dropped about 10 centimetres (3.9 in), approaching closer to 60 centimetres (24 in). By the late 16th century, the average length had increased again by about 13 centimetres (5.1 in), returning to approximately 73 centimetres (29 in).
Shintō (New swords)
Swords forged after 1596 in the Keichō period of the Azuchi–Momoyama period are classified as shintō (New swords). Japanese swords after shintō are different from kotō in forging method and steel (tamahagane). This is thought to be because Bizen school, which was the largest swordsmith group of Japanese swords, was destroyed by a great flood in 1590 and the mainstream shifted to Mino school, and because Toyotomi Hideyoshi virtually unified Japan, uniform steel began to be distributed throughout Japan. The kotō swords, especially the Bizen school swords made in the Kamakura period, had a midare-utsuri like a white mist between hamon and shinogi, but in the swords after shintō it has almost disappeared. In addition, the whole body of the blade became whitish and hard. Almost no one was able to reproduce midare-utsurii until Kunihira Kawachi reproduced it in 2014.
As the Sengoku period (period of warring states) ended and the Azuchi-Momoyama period to the Edo period started, katana-forging also developed into a highly intricate and well-respected art form. Lacquered saya (scabbards), beautifully engraved fittings, silk handles and elegant tsuba (handguards) were popular among samurai in the Edo Period, and eventually (especially when Japan was in peace time), katana became more cosmetic and ceremonial items than practical weapons. The Umetada school led by Umetada Myoju who was considered to be the founder of shinto led the improvement of the artistry of Japanese swords in this period. They were both swordsmiths and metalsmiths, and were famous for carving the blade, making metal accouterments such as tsuba (handguard), remodeling from tachi to katana (suriage), and inscriptions inlaid with gold.
During this period, the Tokugawa shogunate required samurai to wear Katana and shorter swords in pairs. These short swords were wakizashi and tantō, and wakizashi were mainly selected. This set of two is called a daishō. Only samurai could wear the daishō: it represented their social power and personal honour. Samurai could wear decorative sword mountings in their daily lives, but the Tokugawa shogunate regulated the formal sword that samurai wore when visiting a castle by regulating it as a daisho made of a black scabbard, a hilt wrapped with white ray skin and black string. Japanese swords made in this period are classified as shintō.
Shinshintō (New new swords)
In the late 18th century, swordsmith Suishinshi Masahide criticized that the present katana blades only emphasized decoration and had a problem with their toughness. He insisted that the bold and strong kotō blade from the Kamakura period to the Nanboku-chō period was the ideal Japanese sword, and started a movement to restore the production method and apply it to Katana. Katana made after this is classified as a shinshintō. One of the most popular swordsmiths in Japan today is Minamoto Kiyomaro who was active in this shinshintō period. His popularity is due to his timeless exceptional skill, as he was nicknamed "Masamune in Yotsuya" after his disastrous life. His works were traded at high prices and exhibitions were held at museums all over Japan from 2013 to 2014.
The idea that the blade of a sword in the Kamakura period is the best has been continued until now, and as of the 21st century, 80% of Japanese swords designated as National treasure in Japan were made in the Kamakura period, and 70% of them were tachi.
The arrival of Matthew Perry in 1853 and the subsequent Convention of Kanagawa caused chaos in Japanese society. Conflicts began to occur frequently between the forces of sonnō jōi (尊王攘夷派), who wanted to overthrow the Tokugawa Shogunate and rule by the Emperor, and the forces of sabaku (佐幕派), who wanted the Tokugawa Shogunate to continue. These political activists, called the shishi (志士), fought using a practical katana, called the kinnōtō (勤皇刀) or the bakumatsutō (幕末刀). Their katana were often longer than 90 cm (35.43 in) in blade length, less curved, and had a big and sharp point, which was advantageous for stabbing in indoor battles.
Gendaitō (Modern or contemporary swords)
Meiji – World War II
During the Meiji period, the samurai class was gradually disbanded, and the special privileges granted to them were taken away, including the right to carry swords in public. The Haitōrei Edict in 1876 forbade the carrying of swords in public except for certain individuals, such as former samurai lords (daimyō), the military, and the police. Skilled swordsmiths had trouble making a living during this period as Japan modernized its military, and many swordsmiths started making other items, such as farm equipment, tools, and cutlery. The craft of making swords was kept alive through the efforts of some individuals, notably Miyamoto Kanenori (宮本包則, 1830–1926) and Gassan Sadakazu (月山貞一, 1836–1918), who were appointed Imperial Household Artist. The businessman Mitsumura Toshimo (光村利藻, 1877－1955）tried to preserve their skills by ordering swords and sword mountings from the swordsmiths and craftsmen. He was especially enthusiastic about collecting sword mountings, and he collected about 3,000 precious sword mountings from the end of the Edo period to the Meiji period. About 1200 items from a part of his collection are now in the Nezu Museum.
Military action by Japan in China and Russia during the Meiji period helped revive interest in swords, but it was not until the Shōwa period that swords were produced on a large scale again. Japanese military swords produced between 1875 and 1945 are referred to as guntō (military swords).
During the pre-World War II military buildup, and throughout the war, all Japanese officers were required to wear a sword. Traditionally made swords were produced during this period, but in order to supply such large numbers of swords, blacksmiths with little or no knowledge of traditional Japanese sword manufacture were recruited. In addition, supplies of the Japanese steel (tamahagane) used for swordmaking were limited, so several other types of steel were also used. Quicker methods of forging were also used, such as the use of power hammers, and quenching the blade in oil, rather than hand forging and water. The non-traditionally made swords from this period are called shōwatō, after the regnal name of the Emperor Hirohito, and in 1937, the Japanese government started requiring the use of special stamps on the tang (nakago) to distinguish these swords from traditionally made swords. During this period of war, older antique swords were remounted for use in military mounts. Presently, in Japan, shōwatō are not considered to be "true" Japanese swords, and they can be confiscated. Outside Japan, however, they are collected as historical artifacts.
Post-World War II
Between 1945 and 1953, sword manufacture and sword-related martial arts were banned in Japan. Many swords were confiscated and destroyed, and swordsmiths were not able to make a living. Since 1953, Japanese swordsmiths have been allowed to work, but with severe restrictions: swordsmiths must be licensed and serve a five-year apprenticeship, and only licensed swordsmiths are allowed to produce Japanese swords (nihonto), only two longswords per month are allowed to be produced by each swordsmith, and all swords must be registered with the Japanese Government.
Outside Japan, some of the modern katanas being produced by western swordsmiths use modern steel alloys, such as L6 and A2. These modern swords replicate the size and shape of the Japanese katana and are used by martial artists for iaidō and even for cutting practice (tameshigiri).
Mass-produced swords including iaitō and shinken in the shape of katana are available from many countries, though China dominates the market. These types of swords are typically mass-produced and made with a wide variety of steels and methods.
According to the Parliamentary Association for the Preservation and Promotion of Japanese Swords, organized by Japanese Diet members, many katana distributed around the world as of the 21st century are fake Japanese swords made in China. The Sankei Shimbun analyzed that this is because the Japanese government allowed swordsmiths to make only 24 Japanese swords per person per year in order to maintain the quality of Japanese swords.
Many swordsmiths after the Edo period have tried to reproduce the sword of the Kamakura period which is considered as the best sword in the history of Japanese swords, but they have failed. Then, in 2014, Kunihira Kawachi succeeded in reproducing it and won the Masamune Prize, the highest honor as a swordsmith. No one could win the Masamune Prize unless he made an extraordinary achievement, and in the section of tachi and katana, no one had won for 18 years before Kawauchi.
Katana are distinguished by their type of blade:
- Shinogi-Zukuri is the most common blade shape for Japanese katana that provides both speed and cutting power. It features a distinct yokote: a line or bevel that separates the finish of the main blade and the finish of the tip. Shinogi-zukuri was originally produced after the Heian period.
- Shobu-Zukuri is a variation of shinogi-zukuri without a yokote, the distinct angle between the long cutting edge and the point section. Instead, the edge curves smoothly and uninterrupted into the point.
- Kissaki-Moroha-Zukuri is a katana blade shape with a distinctive curved and double-edged blade. One edge of the blade is shaped in normal katana fashion while the tip is symmetrical and both edges of the blade are sharp.
Forging and construction
Typical features of Japanese swords represented by katana and tachi are a three-dimensional cross-sectional shape of an elongated pentagonal to hexagonal blade called shinogi-zukuri, a style in which the blade and the tang (nakago) are integrated and fixed to the hilt (tsuka) with a pin called mekugi, and a gentle curve. When a shinogi-zukuri sword is viewed from the side, there is a ridge line of the thickest part of the blade called shinogi between the cutting edge side and the back side. This shinogi contributes to lightening and toughening of the blade and high cutting ability.
Katana are traditionally made from a specialized Japanese steel called tamahagane, which is created from a traditional smelting process that results in several, layered steels with different carbon concentrations. This process helps remove impurities and even out the carbon content of the steel. The age of the steel plays a role in the ability to remove impurities, with older steel having a higher oxygen concentration, being more easily stretched and rid of impurities during hammering, resulting in a stronger blade. The smith begins by folding and welding pieces of the steel several times to work out most of the differences in the steel. The resulting block of steel is then drawn out to form a billet.
At this stage, it is only slightly curved or may have no curve at all. The katana's gentle curvature is attained by a process of differential hardening or differential quenching: the smith coats the blade with several layers of a wet clay slurry, which is a special concoction unique to each sword maker, but generally composed of clay, water and any or none of ash, grinding stone powder, or rust. This process is called tsuchioki. The edge of the blade is coated with a thinner layer than the sides and spine of the sword, heated, and then quenched in water (few sword makers use oil to quench the blade). The slurry causes only the blade's edge to be hardened and also causes the blade to curve due to the difference in densities of the micro-structures in the steel. When steel with a carbon content of 0.7% is heated beyond 750 °C, it enters the austenite phase. When austenite is cooled very suddenly by quenching in water, the structure changes into martensite, which is a very hard form of steel. When austenite is allowed to cool slowly, its structure changes into a mixture of ferrite and pearlite which is softer than martensite. This process also creates the distinct line down the sides of the blade called the hamon, which is made distinct by polishing. Each hamon and each smith's style of hamon is distinct.
After the blade is forged, it is then sent to be polished. The polishing takes between one and three weeks. The polisher uses a series of successively finer grains of polishing stones in a process called glazing, until the blade has a mirror finish. However, the blunt edge of the katana is often given a matte finish to emphasize the hamon.
Historically, katana have been regarded not only as weapons but also as works of art, especially for high-quality ones. For a long time, Japanese people have developed a unique appreciation method in which the blade is regarded as the core of their aesthetic evaluation rather than the sword mountings decorated with luxurious lacquer or metal works.
It is said that the following three objects are the most noteworthy objects when appreciating a blade. The first is the overall shape referred to as sugata. Curvature, length, width, tip, and shape of tang of the sword are the objects for appreciation. The second is a fine pattern on the surface of the blade, which is referred to as hada or jigane. By repeatedly folding and forging the blade, fine patterns such as fingerprints, tree rings and bark are formed on its surface. The third is hamon. Hamon is a white pattern of the cutting edge produced by quenching and tempering. The object of appreciation is the shape of hammon and the crystal particles formed at the boundary of hammon. Depending on the size of the particles, they can be divided into two types, a nie and a nioi, which makes them look like stars or mist. In addition to these three objects, a swordsmith signature and a file pattern engraved on tang, and a carving inscribed on the blade, which is referred to as horimono, are also the objects of appreciation.
The Hon'ami clan, which was an authority of appraisal of Japanese swords, rated Japanese swords from these artistic points of view. In addition, experts of modern Japanese swords judge when and by which swordsmith school the sword was made from these artistic points of view.
Generally, the blade and the sword mounting of Japanese swords are displayed separately in museums, and this tendency is remarkable in Japan. For example, the Nagoya Japanese Sword Museum "Nagoya Touken World", one of Japan's largest sword museums, posts separate videos of the blade and the sword mounting on its official website and YouTube.
Rating of Japanese swords and swordsmiths
In Japan, Japanese swords are rated by authorities of each period, and some of the authority of the rating is still valid today.
In 1719, Tokugawa Yoshimune, the 8th shogun of the Tokugawa shogunate, ordered Hon'ami Kōchū, who was an authority of sword appraisal, to record swords possessed by daimyo all over Japan in books. In the completed "Kyōhō Meibutsu Chō" (享保名物帳) 249 precious swords were described, and additional 25 swords were described later. The list also includes 81 swords that had been destroyed in previous fires. The precious swords described in this book were called "Meibutsu" (名物) and the criteria for selection were artistic elements, origins and legends. The list of "Meibutsu" includes 59 swords made by Masamune, 34 by Awataguchi Yoshimitsu and 22 by Go Yoshihiro, and these three swordsmiths were considered special. Daimyo hid some swords for fear that they would be confiscated by the Tokugawa Shogunate, so even some precious swords were not listed in the book. For example, Daihannya Nagamitsu and Yamatorige, which are now designated as National Treasures, were not listed.
Yamada Asaemon V, who was the official sword cutting ability examiner and executioner of the Tokugawa shogunate, published a book "Kaiho Kenjaku" (懐宝剣尺) in 1797 in which he ranked the cutting ability of swords. The book lists 228 swordsmiths, whose forged swords are called "Wazamono" (業物) and the highest "Saijo Ō Wazamono" (最上大業物) has 12 selected. In the reprinting in 1805, one swordsmith was added to the highest grade, and in the major revised edition in 1830 "Kokon Kajibiko" (古今鍛冶備考), two swordsmiths were added to the highest grade, and in the end, 15 swordsmiths were ranked as the highest grade. The katana forged by Nagasone Kotetsu, one of the top-rated swordsmith, became very popular at the time when the book was published, and many counterfeits were made. In these books, the three swordsmiths treated specially in "Kyōhō Meibutsu Chō" and Muramasa, who was famous at that time for forging swords with high cutting ability, were not mentioned. The reasons for this are considered to be that Yamada was afraid of challenging the authority of the shogun, that he could not use the precious sword possessed by the daimyo in the examination, and that he was considerate of the legend of Muramasa's curse.
At present, by the Law for the Protection of Cultural Properties, important swords of high historical value are designated as Important Cultural Properties (Jūyō Bunkazai, 重要文化財), and special swords among them are designated as National Treasures (Kokuhō, 国宝). The swords designated as cultural properties based on the law of 1930, which was already abolished, have the rank next to Important Cultural Properties as Important Art Object (Jūyō Bijutsuhin, 重要美術品). In addition, The Society for Preservation of Japanese Art Swords, a public interest incorporated foundation, classifies it into four categories, the highest grade being equal to Important Cultural Properties. Although swords owned by the Japanese Imperial Family are not designated as National Treasures or Important Cultural Properties because they are outside the jurisdiction of the Law for the Protection of Cultural Properties, there are many swords of the National Treasure class, and they are called "Gyobutsu" (御物).
Currently, there are several authoritative rating systems for swordsmiths. According to the rating approved by the Japanese government, from 1890 to 1947, two swordsmiths who were appointed as Imperial Household Artist and after 1955, six swordsmiths who were designated as Living National Treasure are regarded as the best swordsmiths. According to the rating approved by The Society for Preservation of Japanese Art Swords, a public interest incorporated foundation, 39 swordsmiths who were designated as Mukansa (無鑑査) since 1958 are considered to be the highest ranking swordsmiths. The best sword forged by Japanese swordsmiths is awarded the most honorable Masamune prize by The Society for Preservation of Japanese Art Swords. Since 1961, eight swordsmiths have received the Masamune Prize, and among them, three swordsmiths, Masamine Sumitani, Akitsugu Amata and Toshihira Osumi, have received the prize three times each and Sadakazu Gassan II has received the prize two times. These four people were designated both Living National Treasures and Mukansa.
Usage in martial arts
Katana were used by samurai both in the battlefield and for practicing several martial arts, and modern martial artists still use a variety of katana. Martial arts in which training with katana is used include iaijutsu, battōjutsu, iaidō, kenjutsu, kendō, ninjutsu and Tenshin Shōden Katori Shintō-ryū. However, for safety reasons, katana used for martial arts are usually blunt edged, to reduce the risk of injury. Sharp katana are only really used during tameshigiri (blade testing), where a practitioner practices cutting a bamboo or tatami straw post.
Storage and maintenance
If mishandled in its storage or maintenance, the katana may become irreparably damaged. The blade should be stored horizontally in its sheath, curve down and edge facing upward to maintain the edge. It is extremely important that the blade remain well-oiled, powdered and polished, as the natural moisture residue from the hands of the user will rapidly cause the blade to rust if not cleaned off. The traditional oil used is chōji oil (99% mineral oil and 1% clove oil for fragrance). Similarly, when stored for longer periods, it is important that the katana be inspected frequently and aired out if necessary in order to prevent rust or mold from forming (mold may feed off the salts in the oil used to polish the blade).
Ownership and trade restrictions
Republic of Ireland
As of April 2008, the British government added swords with a curved blade of 50 cm (20 in) or over in length ("the length of the blade shall be the straight line distance from the top of the handle to the tip of the blade") to the Offensive Weapons Order. This ban was a response to reports that samurai swords were used in more than 80 attacks and four killings over the preceding four years. Those who violate the ban would be jailed up to six months and charged a fine of £5,000. Martial arts practitioners, historical re-enactors and others may still own such swords. The sword can also be legal provided it was made in Japan before 1954, or was made using traditional sword making methods. It is also legal to buy if it can be classed as a "martial artist's weapon". This ban applies to England, Wales, Scotland and Northern Ireland. This ban was amended in August 2008 to allow sale and ownership without licence of "traditional" hand-forged katana.
A katana forged by Hizen Tadayoshi I. (Saijo Ō Wazamono) Azuchi－Momoyama period. (top) Katana mounting, Late Edo period. (bottom)
Daishō, black waxed scabbards. This daishō is an informal style because the thread wound on the hilt is purple. 19th century, Edo period. Tokyo Fuji Art Museum.
Mounting for a katana forged by Motoshige. late 16th or early 17th century, Azuchi–Momoyama or Edo period. Important Cultural Property. Tokyo National Museum.
Japanese katana showing a horimono (blade carving), Metropolitan Museum of Art.
Koshirae (mountings) of an Edo period daishō, rayskin wrapped with silk.
- Kazuhiko Inada (2020), Encyclopedia of the Japanese Swords. p43. ISBN 978-4651200408
- Takeo Tanaka. (2012) Wokou p.104. Kodansha. ISBN 978-4062920933
- "日本の技術の精巧さは…". Mainichi Shimbun. 27 March 2016. Archived from the original on 28 August 2016.
- 日本刀鑑賞のポイント「日本刀の姿」 Nagoya Touken Museum Touken World
- 日本刀と刀の違い Nagoya Japanese Sword Museum Touken World
- 1988, 国語大辞典（新装版） (Kokugo Dai Jiten, Revised Edition) (in Japanese), Tōkyō: Shogakukan, 刀 (katana) entry available online here
- 2006, 大辞林 (Daijirin), Third Edition (in Japanese), Tōkyō: Sanseidō, ISBN 4-385-13905-9
- 1995, 大辞泉 (Daijisen) (in Japanese), Tōkyō: Shogakukan, ISBN 4-09-501211-0, 刀 (katana) entry available online here
- "How Long Is a Katana?". Medieval Swords World. 3 August 2019. Retrieved 9 September 2019.
- Sun-Jin Kim (1996). Tuttle Dictionary Martial Arts Korea, China & Japan. Tuttle Publishing. p. 61. ISBN 978-0-8048-2016-5.
- Adrian Akmajian; Richard A. Demers; Ann K. Farmer; Robert M. Harnish (2001). Linguistics: An Introduction to Language and Communication. Massachusetts: The MIT Press. p. 624. ISBN 9780262511230.
- Sebastião Rodolfo Dalgado; Anthony X. Soares (1988). Portuguese Vocables in Asiatic Languages: From the Portuguese Original of Monsignor Sebastiao Rodolfo Dalgado. South Asia Books. p. 520. ISBN 978-81-206-0413-1.
- Kanzan Sato (1983). The Japanese Sword: A Comprehensive Guide (Japanese arts Library). Japan: Kodansha International. p. 220. ISBN 978-0-87011-562-2.
- 土子民夫 (May 2002). 日本刀21世紀への挑戦. Kodansha International. p. 30. ISBN 978-4-7700-2854-9.
- Stephen Turnbull (2012). Katana: The Samurai Sword. Osprey Publishing. p. 4. ISBN 9781849086585.
- Roger Ford (2006). Weapon: A Visual History of Arms and Armor. DK Publishing. pp. 66, 120. ISBN 9780756622107.
- Anthony J. Bryant and Angus McBride (1994) Samurai 1550–1600. Osprey Publishing. p. 49. ISBN 1855323451
- 歴史人 September 2020. pp.40-43. ASIN B08DGRWN98
- History of Japanese swords "Muromachi period － Azuchi-Momoyama period". Nagoya Japanese Sword Museum Touken World
- Arms for battle - spears, swords, bows. Nagoya Japanese Sword Museum Touken World
- Kazuhiko Inada (2020), Encyclopedia of the Japanese Swords. p42. ISBN 978-4651200408
- Transition of kotō, shintō, shinshintō, and gendaitō. Nagoya Japanese Sword Museum Touken World
- 歴史人 September 2020. p40. ASIN B08DGRWN98
- List of terms related to Japanese swords "Sasuga". Nagoya Japanese Sword Museum Touken World.
- Differences in Japanese swords according to status. Nagoya Japanese Sword Museum Touken World.
- Stephen Turnbull (8 February 2011). Katana: The Samurai Sword. Osprey Publishing. pp. 22–. ISBN 978-1-84908-658-5.
- Kōkan Nagayama (1997). The Connoisseur's Book of Japanese Swords. Kodansha International. p. 28. ISBN 978-4-7700-2071-0.
- Leon Kapp; Hiroko Kapp; Yoshindo Yoshihara (1987). The Craft of the Japanese Sword. Japan: Kodansha International. p. 167. ISBN 978-0-87011-798-5.
- 歴史人 September 2020. pp.70-71. ASIN B08DGRWN98
- Koichi Shinoda. (1 May 1992). Chinese Weapons and Armor. Shinkigensha. ISBN 9784883172115
- Rekishi Gunzo. (2 July 2011) Complete Works on Strategic and Tactical Weapons. From Ancient China to Modern China. Gakken. ISBN 9784056063448
- 相州伝の名工「正宗」. Nagoya Japanese Sword Museum Touken World.
- weblio. Handachi-Goshirae.
- History of Japanese sword. Nagoya Japanese Sword Museum Touken World
- 日本刀鑑賞のポイント「日本刀の映りとは」. Nagoya Japanese Sword Museum Touken World
- Masayuki Murata. 明治工芸入門 p.120. Me no Me, 2017 ISBN 978-4907211110
- 特別展「埋忠〈UMETADA〉桃山刀剣界の雄」. Internet Museum
- Oscar Ratti; Adele Westbrook (1991). Secrets of the Samurai: The Martial Arts of Feudal Japan. Tuttle Publishing. p. 484. ISBN 978-0-8048-1684-7.
- Kazuhiko Inada (2020), Encyclopedia of the Japanese Swords. p46. ISBN 978-4651200408
- 歴史人 September 2020. pp.42-43. ASIN B08DGRWN98
- 幕末に活躍した日本刀の名工「清麿」展＝ダイナミックな切っ先、躍動感あふれる刃文. Jiji Press
- 清麿展 －幕末の志士を魅了した名工－ Internet Museum
- 源清麿 四谷正宗の異名を持つ新々刀随一の名工. Kōgetudō.
- 日本刀の格付けと歴史. Touken World
- 鎌倉期の古名刀をついに再現 論説委員・長辻象平. Sankei Shimbun. 2 July 2017
- Kōkan Nagayama (1997). The Connoisseur's Book of Japanese Swords. Kodansha International. p. 43. ISBN 978-4-7700-2071-0.
- Pinnacle of Elegance －Sword fittings of the Mitsumura Collection－. Nezu Museum
- The World of Edo Dandyism From Swords to Inro. Internet Museum
- Pinnacle of Elegance －Sword fittings of the Mitsumura Collection－. Internet Museum
- Clive Sinclaire (1 November 2004). Samurai: The Weapons and Spirit of the Japanese Warrior. Lyons Press. pp. 58–59. ISBN 978-1-59228-720-8.
- John Yumoto (13 December 2013). The Samurai Sword: A Handbook. Tuttle Publishing. pp. 6, 70. ISBN 978-1-4629-0706-9.
- Leon Kapp; Hiroko Kapp; Yoshindo Yoshihara (January 2002). Modern Japanese Swords and Swordsmiths: From 1868 to the Present. Kodansha International. pp. 58–70. ISBN 978-4-7700-1962-2.
- Clive Sinclaire (1 November 2004). Samurai: The Weapons and Spirit of the Japanese Warrior. Lyons Press. p. 60. ISBN 978-1-59228-720-8.
- Steve Shackleford (7 September 2010). "Sword Capitol of the World". Spirit of the Sword: A Celebration of Artistry and Craftsmanship. Iola, Wisconsin: Adams Media. p. 23. ISBN 978-1-4402-1638-1.
- Sankei Shimbun, June 22, 2018. p.1
- Sankei Shimbun, June 22, 2018. p.2
- 歴史人 September 2020. p36, p47, p50. ASIN B08DGRWN98
- 鉄と生活研究会 (2008). トコトンやさしい鉄の本. 日刊工業新聞社. ISBN 978-4-526-06012-0.
- Secrets of the Samurai Sword. Pbs.org. Retrieved 2013-08-08.
- "Step 1: Types of Katana Swords". Katana Sword Reviews. Retrieved 25 April 2016.
- Richard Cohen (18 December 2007). By the Sword: A History of Gladiators, Musketeers, Samurai, Swashbucklers, and Olympic Champions. Random House Publishing Group. p. 124. ISBN 978-0-307-43074-8.
- James Drewe (15 February 2009). Tàijí Jiàn 32-Posture Sword Form. Singing Dragon. p. 10. ISBN 978-1-84642-869-2.
- How to appreciate a Japanese sword. Tozando.
- Kazuhiko Inada (2020), Encyclopedia of the Japanese Swords. pp.117-119 ISBN 978-4651200408
- Touken World YouTube videos about Japanese swords
- Touken World YouTube videos on koshirae (sword mountings)
- Iwasaki, Kosuke (1934), "Muramasa's curse (村正の祟りについて)", Japanese sword course, volume 8, Historical Anecdotes and Practical Appreciation. (日本刀講座 第8巻 歴史及説話・実用及鑑賞), Yuzankaku, pp. 91–118, doi:10.11501/1265855
- 日本刀の刀匠・刀工「無鑑査刀匠」. Nagoya Japanese Sword Museum Touken World.
- Mason Smith (December 1997). "Stand and Deliver". Black Belt magazine. Active Interest Media, Inc. 35 (12): 66. ISSN 0277-3066.
- Graham Priest; Damon Young (21 August 2013). Martial Arts and Philosophy: Beating and Nothingness. Open Court. p. 209. ISBN 978-0-8126-9723-0.
- Thomas A. Green; Joseph R. Svinth (2010). Martial Arts of the World: An Encyclopedia of History and Innovation. ABC-CLIO. pp. 120–121. ISBN 978-1-59884-243-2.
- Gordon Warner; Donn F. Draeger (2005). Japanese Swordsmanship: Technique and Practice. Boston, Massachusetts: Weatherhill. pp. 110–131. ISBN 978-0834802360.
- "S.I. No. 338/2009 — Firearms and offensive Weapons Act 1990 (offensive Weapons) (Amendment) Order 2009". Irish Statute Book, Government of Ireland. 28 August 2009.
- The Criminal Justice Act 1988 (Offensive Weapons)(Amendment) Order 2008. Opsi.gov.uk (19 November 2010). Retrieved 2013-08-08.
- "Ban on imitation Samurai swords". BBC News. 12 December 2007. Retrieved 29 December 2011.
Calls for a ban came after a number of high-profile incidents in which cheap Samurai-style swords had been used as a weapon. The Home Office estimates there have been some 80 attacks in recent years involving Samurai-style blades, leading to at least five deaths.
- EXPLANATORY MEMORANDUM TO THE CRIMINAL JUSTICE ACT 1988 (OFFENSIVE WEAPONS) (AMENDMENT No. 2): ORDER 2008. opsi.gov.uk. Retrieved 2013-08-08.
- Perrin, Noel (1980). Giving Up the Gun: Japan's Reversion to the Sword, 1543–1879. Boston: David R. Godine. p. 140. ISBN 978-0-87773-184-9.
- Robinson, H. Russell (1969). Japanese Arms and Armor. New York: Crown Publishers Inc.
- S. Alexander Takeuchi (aka T). "Dr. T's 'Nihonto Random Thoughts' Page". Florence, AL: Department of Sociology, University of North Alabama. Archived from the original on 8 January 2010.
- Yumoto, John M (1958). The Samurai Sword: A Handbook. Boston: Tuttle Publishing. p. 204. ISBN 978-0-8048-0509-4.
- Satō, Kanzan (1983). The Japanese Sword. Kodansha International. ISBN 9780870115622.
- Media related to Lua error in Module:Commons_link at line 61: attempt to index field 'wikibase' (a nil value). at Wikimedia Commons
- Media related to Lua error in Module:Commons_link at line 61: attempt to index field 'wikibase' (a nil value). at Wikimedia Commons
Lua error in Module:Authority_control at line 1136: attempt to index field 'wikibase' (a nil value).